Both stores OPEN except Christmas day, Boxing day and New years day | Gold Coast Superstore hours and more | Brisbane NOW OPEN at Browns Plains till 5.30 on Thursdays - click here for hours and details | More than 97% of Orders are dispatched within 4 working hours | See about us at the bottom of the page for more details.
This is usually in stock and ships immediately - if out of stock click on "backorder" and we will send when new stock arrives (usually 1-3 days) - you will be contacted with ETA. Contact us for more information.
Lumatek - one of the best brands of Grow lighting, has LED's now - and a huge output of 2925umol/s
Please note you will have TOO MUCH LIGHT if you aren't at ceiling height or have a CO2 enriched environment.
Raising the benchmark for horticultural lighting, Lumatek introduces to growers the most powerful grow light on the market.
The Lumatek Zeus 1000W Xtreme PPFD CO2 LED.
Designed for 1.5×1.5m coverage with Supplemental CO2 for optimal efficiency and results.
The higher specification Lumatek Zeus 1000W Xtreme PPFD CO2 LED is a linear multi-light bar fixture producing extremely high levels of PPF of 2925 µmol/s and very high efficacy of up to 2.9 umol/J.
The fixture efficacy will vary depending on the Input Voltage used.
Pioneers of the innovative, modular, magnetic LED light bar design.
With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering a significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) ensuring an even light distribution and uniform spread.
The Zeus 1000W Xtreme PPFD CO2 produces extremely high levels of light intensity which requires the use of supplemental CO2 for those who plan to grow on 1.5×1.5m grow areas with short distances from Canopy to the light.
Carbon Dioxide (CO2) Supplementation
The use of CO2 with this fixture is not mandatory, but to run it without it, then we recommend a longer canopy distance to the light, ensuring the optimal PPFD levels accordingly to the grow stage. Using this last method the expected optimal coverage area gets to 1.8×1.8m but with lower levels of PPFD intensity concentration.
Supplementation use of Carbon Dioxide (CO2) in your controlled environment can significantly improve the yield of your crop if used correctly. In general a good rule is that once you exceed 1000 µmol/s/m2 PPFD levels, you should be 1:1 with CO2 PPM – up to 1500. So at max PPFD = 1500 µmol/s/m2, CO2 would be 1500 PPM (a little lower, 1400 PPM may be the safest to start).
The new line of Zeus is built using high quality Lumatek drivers and latest generation top bin LEDs from Lumileds and Osram, generating a full-spectrum light source ideal for veg and flowering cycles. Another new feature of this line is the Clear Glue protection cover technology on the LED bars; resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes, extra corrosion resistance and high waterproof of IP65. For basic maintenance, simply clean the bars with wet cotton.
For different cultivars, propagation and vegetative growth periods the Zeus may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with 10 LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.
External Control
The Zeus fixture can also be externally controlled with a Lumatek digital lighting controller (Digital Panel Plus 2.0) featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.
LUMATEK CONTROL PANEL PLUS 2.0 (HID+LED)FULLY CONTROLLABLE WITH
Universal Control Systems Compatibility
Lumatek LED Fixtures can be fully controlled with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.
Efficacy: up to 2.9 µmol/J
PPF: 2925 µmol/s
Input Voltage: 220-240V, 50-60Hz
INPUT POWER: 1025W (±5%)
Footprint: 1.5x1.5m with Supp. CO2; 1.8x1.8m without Supp. CO2 used at higher heights.
Waterproof: IP65
Lifetime: 60 000 Hrs
Light Distribution: 120°
Light Source: Higher Spec Osram and Lumileds Diodes
Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)
External Control: With Lumatek Digital Panel Plus 2.0
Weight: 18 Kg
Dimensions: 1181.2x1091x105.7mm
Spectrum: Full Spectrum F
SKU
Zeus1000extreme
Shipping Weight
19.0000kg
Be The First To Review This Product!
Help other Hydrocentre Hydroponics users shop smarter by writing reviews for products you have purchased.
Backorders are products that are on their way to us from suppliers.
Backorders will be dispatched to you as soon as they arrive - usually in 1-7 days
If you want to contact us we can let you know the delay.
We will send you an ETA as soon as we can, and you can cancel the backorder and get a full refund if you want to.
Do you wish to proceed knowing there will be a delay of around 1-7 days?
(If you have urgent items as well as Backorder items, please send as two separate orders so the urgent items go out immediately.)
You’ve just added a Pick-Up only Item to your cart!
The item you have added to your cart was a Pick-Up only item and will make your order a Pick-Up order if you choose to continue.
To reverse this, press close and the item will not be added to your cart.
Shop Now. Pay Later. Always interest-free.
Add your favourites to cart
Select Afterpay at checkout
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms